COUNTRY
English – AustraliaEspañol – SpainРусский – RussiaРусский – KazakhstanEspañol – Latin America Português – Brazil Україна – Ukraine

Interstellar

Mid Tower Case

  • Mesh front panel with air vents delivers improved air flow
  • Rotatable PCIe expansion slot panel allows for vertical graphics card installation
  • Addressable RGB compatible – Controlled by LED control button or ARGB motherboard
  • Connect up to five Addressable RGB fans with 5-Port PWM ARGB Control Hub
  • Five 12cm fans included: Three 12cm ARGB fans and two 12cm black fans
  • Spacious interior offers support for high-end hardware such as graphics cards and liquid coolers
  • Magnetic front air filter allows for easy cleaning and maintenance
  • Full tempered glass side panel showcases the inside of your rig

Specifications are subject to change without notice.
Products and models may vary depending on your region.
Contact your local retailer for more information.

Where To Buy
FEATURES SPECS VIDEOS

Watch Promo

THREE 12CM ARGB FANS INCLUDED

Includes 3 x 120mm ARGB fans with PWM compatibility that can be controlled using LED control button or ARGB motherboard.

TWO 12CM BLACK FRONT FANS INCLUDED

Includes two 12cm black fans in the front of the case to deliver maximum cooling for your system.

VERTICAL GPU MOUNTING

Featuring a rotatable PCIe expansion slot panel, you can choose to mount your graphics card vertically or horizontally.

SUPPORTS LONGER GRAPHICS CARDS

GPU support bracket holds graphics cards with a length of 282mm or longer when mounted horizontally, providing additional stability and support for longer graphics cards.

COSMIC RGB LIGHTING DESIGN

Featuring a Cosmic RGB lighting design, Interstellar adds a visually stunning and dynamic element to your setup. Comes with built-in lighting modes that can be controlled via LED control button.

ADDRESSABLE RGB COMPATIBLE

Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header).

Addressable RGB can be controlled using any of two ways:
LED control button or ARGB motherboard.

5-PORT PWM ARGB CONTROL HUB

Includes a 5-port PWM ARGB control hub to connect your Addressable RGB fans.
• Comes with 5 PWM ARGB fan ports
• Compatible with industry standard 4-Pin PWM and 3-Pin ARGB fans
• Reports fan RPM readings to BIOS

PWM COMPATIBILITY

Please check if the 4-Pin fan header on your motherboard is PWM compatible.

• PWM based – PWM compatible
• Voltage based – not PWM compatible

For more information, refer to our PWM Compatibility Guide.

IMPROVED AIR FLOW

Featuring a unique design with an embedded mesh panel, this case delivers a stylish look and feel while providing superior air flow and circulation.

MAXIMUM DUST PROTECTION

Comes equipped with three easy-to-remove dust filters, including magnetic front and top panel filters along with a bottom dust filter, to help keep your system clean and running smoothly.

FULL TEMPERED GLASS SIDE PANEL

Comes equipped with a full tempered glass side panel to showcase the inside of your rig while putting your components on display.

AIR COOLING

Supports air cooling in the front, top, and rear of the case to enhance cooling performance.

  • Front: 120mm x 3 or 140mm x 2 (120mm Black Fan x 2 included)
  • Top: 120mm x 2 or 140mm x 2 (120mm ARGB Fan x 2 included)
  • Rear: 120mm x 1 (120mm ARGB Fan x 1 included)

LIQUID COOLING

Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.

  • Front: 120/240/280/360mm Radiator (Optional) (for 360mm, radiator length <395mm) (for 240/280/360mm, radiator plus fan total thickness <58mm)
  • Top: 120/240/280mm Radiator (Optional) (Radiator plus fan total thickness<55mm)
  • Rear: 120mm Radiator (Optional)

Detachable Cable Management Shroud
(must be removed to install a radiator onto the front bracket)

BUILT FOR HIGH PERFORMANCE

  • Supports ATX, Micro ATX and Mini- ITX motherboards
  • Supports high-end graphics cards up to 362mm (without front fan)
  • Supports CPU cooler up to 163mm

CONVENIENT ACCESS TO YOUR MEDIA

Quick and easy access to LED control button, USB-C x 1, USB3.0 x 2, HD audio and mic ports, and power & reset button.

STORAGE CAPABILITY

  • Supports up to 2 x 3.5” HDDs (2 x 3.5”/2.5″).
  • Supports up to 4 x 2.5” SSDs (2 x 2.5” and 2 x 2.5”/3.5”).

PRODUCT GALLERY

Interstellar-G-BK-v1

SPECS

Model Interstellar-G-BK-v1
Case Type Mid Tower
Color Black
Body Material SPCC
Front Panel Material ABS
Steel Thickness 0.6mm
Motherboards ATX/micro ATX/mini-ITX
Case Dimensions (Internal) 210 x 470 x 380mm (W x H x D)
Case Dimensions (Overall) 210 x 483 x 429mm (W x H x D)
3.5” Drive Bays 2 Max. (2 x 3.5”/2.5″)
2.5” Drive Bays 4 Max. (2 x 2.5” and 2 x 2.5”/3.5”)
Expansion Slots 7
GPU Clearance Supports GPU up to 362mm (without front fan)
CPU Cooler Clearance Supports CPU cooler up to 163mm
Air Cooling Front: 120mm x 3 or 140mm x 2 (Max.)
(120mm Black Fan x 2 included)
Top: 120mm x 2 or 140mm x 2 (Max.)
(120mm ARGB Fan x 2 included)
Rear: 120mm x 1 (120mm ARGB Fan x 1 included)
Liquid Cooling Front: 120/240/280/360mm Radiator (Optional)
(For 360mm, radiator length <395mm)
(For 240/280/360mm, radiator plus fan total thickness <58mm)
Top: 120/240/280mm Radiator (Optional)
(Radiator plus fan total thickness<55mm)
Rear: 120mm Radiator (Optional)
I/O Ports USB3.0 x 2 | USB-C x 1 | HD Audio & Mic.
Internal Cable Management Depth 19.8mm
Power Supply ATX PSU (Including cables, up to 186mm) (Optional)
EAN Code 4711099473649

Download your user manual here.

Download

VIDEOS