FETURES
RGB FUNCTIONS
The P7-L240 is Project 7’s RGB ready closed loop liquid cooling system. The unit comes with translucent fans and transparent pump casing, allowing to fully appreciate the 16.8 million colors and effects that will make your system stand out.
RGB FUNCTIONS
The P7-L240 is Project 7’s RGB ready closed loop liquid cooling system. The unit comes with translucent fans and transparent pump casing, allowing to fully appreciate the 16.8 million colors and effects that will make your system stand out.
RGB LIGHTING
Access 16.8 million colors and three LED modes with P7-S1 (Project7-Software1), available with our P7-Hub (P7-H1).
RGB functions can also be controlled through motherboards with 4-Pin RGB configuration.
RGB LIGHTING
Access 16.8 million colors and three LED modes with P7-S1 (Project7-Software1), available with our P7-Hub (P7-H1).
RGB functions can also be controlled through motherboards with 4-Pin RGB configuration.
RGB SOFTWARE
Take complete control of 16.8 million colors. Choose from different lighting modes or set your color by entering HTML color code.
MONITOR FAN RPM
Monitors RPM of up to five fans compatible with either 4-pin or 3-pin connectors through the P7-H1 (Project7- Hub1)
WATER BLOCK
P7-L240’s water block is built with pure copper for a superior heat conductivity. The block’s micro channel design allows for faster heat dissipation keeping your CPU at the ideal temperature under standard and overclocking performance scenarios.
WATER BLOCK
P7-L240’s water block is built with pure copper for a superior heat conductivity. The block’s micro channel design allows for faster heat dissipation keeping your CPU at the ideal temperature under standard and overclocking performance scenarios.
MOTOR
The motor of the P7-L240 is built with a balanced impeller and high-quality bearings that allow for a near-silent performance.
DUAL SOUND-PROOF CHAMBER
The pump features a dual chamber casing which reduces the noise emitted by the impeller and provides extra fluid capacity.
Note: The motor might emit some noise the first time of operation, this is due to the air expelled when the impeller fills the chamber with liquid for the first time.
RESERVOIR
Commonly available liquid cooling systems that feature a water pump with integrated reservoir, trade-off capacity in exchange of occupying less casing space. This is not the case with Aerocool’s P7-L240, since its integrated reservoir includes an extra liquid chamber that occupies practically no extra casing space.
The easy refillable extra water chamber adds 100ml capacity to the unit allowing a more efficient heat dissipation.
TUBES
P7-L240 is built with the highest quality tubing and fittings. Soft material tubing facilitates installation, and the mesh finishing in the sleeves gives the cooling set a modern aesthetic consistent with Project 7’s design guidelines.
RADIATOR
P7-L240 low-density fins per inch radiator (LFPI) allows the air generated by the fans to pass almost unobstructed, while providing just the right heat dissipation surface needed for the system. This achieves a perfect balance between cooling performance and noise reduction.
Low density radiators provide higher airflow at lower noise levels compared to equivalent size high density radiators.
FAN BLADES
Fan blade fins direct airflow to increase air pressure for maximum cooling performance and reduce air resistance and minimize noise.
ANTI-VIBRATION PADS
Anti-Vibration pads absorb and dampen vibrations caused by fan rotation.
ANTI-VIBRATION PADS
Anti-vibration pads absorb and dampen vibrations caused by fan rotation.
