COUNTRY
English – AustraliaEspañol – SpainРусский – RussiaРусский – KazakhstanEspañol – Latin America Português – Brazil Україна – Ukraine

Tor Pro

FULL TOWER CASE

Premium full tower case with a full tempered glass side panel and front panel to showcase the inside of your rig. Comes equipped with three 14cm Addressable RGB Edge fans in the front and one 14cm Addressable RGB Edge fan in the rear of the case.

Addressable RGB fans can be controlled using any one of three ways: RGB LED control button on top of the case, RGB remote control, or Addressable RGB motherboard. With support for E-ATX motherboards, this case was built for maximum performance.

  • Full tempered glass front side and front panels to showcase the inside of your rig
  • Comes equipped with three 14cm Addressable RGB Edge fans in the front and one 14cm Addressable RGB Edge fan in the rear of the case
  • Addressable RGB fans can be controlled using LED control button, RGB remote control, or Addressable RGB motherboard
  • Supports E-ATX motherboards for maximum performance
  • Includes a 10-port hub with PWM control functions
  • Supports liquid cooling in the front, rear, and bottom of the case and the side of the PSU cage

Specifications are subject to change without notice.
Products and models may vary depending on your region.
Contact your local retailer for more information.

Categories: , , , , , , , , , , , , ,

FEATURES

ADDRESSABLE RGB COMPATIBLE

Take full control of your Addressable RGB fans using any one of three ways:

LED CONTROL
BUTTON

RGB REMOTE
CONTROL

ADDRESSABLE RGB MOTHERBOARD

10-PORT RGB CONTROL HUB

Features a 10-port hub with PWM control functions and allows you to connect up to 10 Addressable RGB fans or any other third-party LED accessories.

Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).

PWM COMPATIBILITY 

Please check if the 4-Pin fan header on your motherboard is PWM compatible.

• PWM based – PWM compatible
• Voltage based – not PWM compatible

For more information, refer to our PWM Compatibility Guide. 

FOUR ADDRESSABLE RGB FANS INCLUDED

Comes equipped with three 14cm Edge Addressable RGB fans in the front and one 14cm Edge Addressable RGB fan in the rear of the case.

Featuring a stylish Edge design, these fans add a whole new element of flair to your rig.

HIGH-END MOTHERBOARD SUPPORT

With support for E-ATX motherboards, this case is built for maximum performance.

BUILT FOR HIGH PERFORMANCE

  • Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards
  • Supports CPU coolers up to 189mm
  • Supports high-end graphics cards up to 383mm

FLAUNT YOUR RIG

Comes equipped with beautifully crafted, full tempered glass side and front panels to properly showcase the inside of your rig.

AIR COOLING

Supports air cooling in the front, top, and rear of the case and the side of the PSU cage to enhance cooling performance.

  • Front: 120mm x 4 or 140mm x 3 or 200mm x 2 (Includes 140mm Addressable RGB Fan x 3)
  • Rear: 120mm x 2 or 140mm x 2 (Includes 140mm Addressable RGB Fan x 1)
  • Bottom: 120mm x 3 or 140mm x 2 (Optional)
  • PSU: 120mm x 3 or 140mm x 2 (Optional)

LIQUID COOLING

Supports liquid cooling in the front, rear, and bottom of the case and the side of the PSU cage for maximum efficiency cooling.

  • Front: 360mm/480mm Radiator (Optional)
  • Rear: 240mm/280mm Radiator (Optional)
  • Bottom: 240mm/280mm Radiator (Optional, Fan + Radiator: Thickness<52mm)
  • PSU: 240mm/280mm Radiator (Optional)

COOLING FOR YOUR GRAPHICS CARD

Supports graphics card cooling: 120mm x 3 or 140mm x 2 fans for superior VGA cooling.

CONVENIENT ACCESS TO YOUR MEDIA

Quick and easy access to LED control button, 2 x USB 3.0, 2 x USB 2.0, HD audio and mic ports, and power button.

STORAGE CAPABILITY

Supports up to 2 x 3.5” HDDs (Compatible with 2.5″ HDD/SSD) and 4 x 2.5” HDDs/SSDs (2 x 2.5” and 2 x 2.5”/3.5”).

EASY MAINTENANCE

Removable dust filters on the top and bottom of the case for fast and convenient cleaning.

PRODUCT GALLERY

SPECS

Model Tor Pro
Case Type Full Tower
Color Black
Steel Thickness 0.7mm
Motherboards E-ATX/ATX/micro-ATX/mini-ITX
Case Dimensions (Overall) 249.5 x 566 x 473mm (W x H x D)
5.25” Drive Bays 0
3.5” Drive Bay 2 Max. (2 x 3.5”/2.5″)

2.5” Drive Bay 4 Max. (2 x 2.5” and 2 x 2.5”/3.5”)
Expansion Slots 9
GPU Clearance Supports GPU up to 383mm
CPU Cooler Clearance Supports CPU up to 189mm
I/O Ports USB3.0 x 2 | USB2.0 x 2 | HD Audio & Mic.
Air Cooling System Front: 120mm x 4 or 140mm x 3 or 200mm x 2 (Includes 140mm RGB Fan x 3)
Rear: 120mm x 2 or 140mm x 2 (Includes 140mm RGB Fan x 1)
Bottom: 120mm x 3 or 140mm x 2 (Optional)
PSU: 120mm x 3 or 140mm x 2 (Optional)
Liquid Cooling Front: 360mm/480mm Radiator (Optional)
Rear: 240mm/280mm Radiator (Optional)
Bottom: 240mm/280mm Radiator (Optional)(Fan + Radiator: Thickness<52mm)
PSU: 240mm/280mm Radiator (Optional)
Net Weight/Gross Weight 11kg (24.25 lbs.)/12.5kg (27.56 lbs.)
Internal Cable Management Depth 32mm
Power Supply ATX PSU (Including cables, up to 240mm) (Optional)

USER MANUAL

Download your user manual here.

Click Me

Related products