Prism ARGB

ARGB MID TOWER CASE

High-performance mid tower case with a tempered glass front panel design and full tempered glass side panel, allowing you to showcase the inside of your rig. Comes equipped with four 12cm Addressable RGB fans that can be controlled using LED control button or ARGB motherboard. Includes a 6-port ARGB control hub to connect and control your ARGB fans.

  • Control your Addressable RGB fans using compatible ARGB motherboard
  • Includes a 6-port ARGB control hub to connect your Addressable RGB fans
  • Tempered glass front panel design and full tempered glass side panel to showcase the inside of your rig
  • Air vents in the front panel allow for increased air flow and circulation
  • Two additional vertical expansion slots allow for vertical graphics card installation
  • Supports liquid cooling in the front, top, and rear of the case
  • Supports CPU cooler up to 164mm

Specifications are subject to change without notice.
Products and models may vary depending on your region.
Contact your local retailer for more information. 

ADDRESSABLE RGB COMPATIBLE

Control your Addressable RGB using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header).

Addressable RGB can be controlled using any of two ways:
LED control button or ARGB motherboard.

6-PORT ARGB CONTROL HUB

Features a 6-port hub with PWM control functions and allows you to connect up to six 6-Pin AeroCool Addressable RGB fans and up to two 3-Pin Addressable RGB accessories with +5V ARGB connector.

Access 16.8 million colors using compatible Addressable RGB motherboard (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).

PWM COMPATIBILITY

Please check if the 4-Pin fan header on your motherboard is PWM compatible.

PWM based – PWM compatible
Voltage basednot PWM compatible

For more information, refer to our PWM Compatibility Guide.

FOUR 12CM ADDRESSABLE RGB FANS INCLUDED​

Comes equipped with three 12cm ARGB fans in the front and one 12cm ARGB fan in the rear of the case.

EXPANSION SLOTS FOR VERTICAL GRAPHICS CARD INSTALLATION

Comes with two additional vertical expansion slots, allowing you to install your graphics card at a vertical position.

FULL TEMPERED GLASS SIDE PANEL

Comes equipped with a full tempered glass side panel to showcase the inside of your rig and put your components on display.

IMPROVED AIR VENTILATION 

Featuring a mesh front panel design, this case allows for clear viewing of your front LED fans while improving air flow and ventilation.

EFFICIENT CABLE MANAGEMENT

Comes with three convenient cable management clips to keep your cables neat, tidy, and secure.

AIR COOLING

Supports air cooling in the front, top, and rear of the case to enhance cooling performance.

  • Front: 120mm x 3 or 140mm x 3 (120mm ARGB Fan x 3 included)
  • Top: 120mm x 2 or 140mm x 2 (Max.)
  • Rear: 120mm x 1 (120mm ARGB Fan x 1 included)
  • PSU Shroud: 120mm x 2 (Max.)

LIQUID COOLING

Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.

    • Front: 120/240/280/360mm Radiator (Optional)
    • Top: 120/240/280mm Radiator (Optional)
      (Fan + Radiator thickness <55mm)
    • Rear: 120mm Radiator (Optional)

DUAL CHAMBER DESIGN

Built with a dual chamber design to direct heat away from the main chamber for more effective all-around cooling.

BUILT FOR HIGH PERFORMANCE

  • Supports ATX, Micro-ATX, and Mini-ITX motherboards
  • Supports CPU coolers up to 164mm
  • Supports high-end graphics cards up to 346mm (without front radiator)

CONVENIENT ACCESS TO YOUR MEDIA

Quick and easy access to 2 x USB 3.0, 1 x USB 2.0, HD audio and mic ports, and power & reset button.

STORAGE CAPABILITY

Supports up to 2 x 3.5” HDDs (1 x 3.5” and 1 x 3.5”/2.5) and 2 x 2.5” SSDs (1 x 2.5” and 1 x 2.5”/3.5”).

EASY MAINTENANCE

Removable dust filters for convenient cleaning and maintenance.

PRODUCT GALLERY

SPECS

Model Prism-G-BK-v3
Case Type Mid Tower
Color Black
Body Material SPCC
Front Panel Material Tempered Glass + ABS
Steel Thickness 0.5mm
Motherboards ATX/micro ATX/mini-ITX
Case Dimensions (Internal) 210 x 465 x 350mm (W x H x D)
Case Dimensions (Overall) 216.7 x 477 x 403mm (W x H x D)
3.5” Drive Bays 2 Max. (1 x 3.5” and 1 x 3.5”/2.5)
2.5” Drive Bays 2 Max. (1 x 2.5” and 1 x 2.5”/3.5”)
Expansion Slots 7+2
GPU Clearance Supports GPU up to 346mm (without front radiator)
CPU Cooler Clearance Supports CPU cooler up to 164mm
Air Cooling Front: 120mm x 3 or 140mm x 3
(120mm ARGB Fan x 3 included)
Top: 120mm x 2 or 140mm x 2 (Max.)
Rear: 120mm x 1 (120mm ARGB Fan x 1 included)
PSU Shroud: 120mm x 2 (Max.)
Liquid Cooling Front: 120/240/280/360mm Radiator (Optional)
Top: 120/240/280mm Radiator (Optional)
(Fan + Radiator) thickness <55mm)
Rear: 120mm Radiator (Optional)
I/O Ports USB3.0 x 2 | USB2.0 x 1 | HD Audio & Mic.
Internal Cable Management Depth 22.6mm
Power Supply ATX PSU (Including cables, up to 184mm) (Optional)
EAN Code 4711099471775

Download your user manual here.

VIDEOS