COUNTRY
English – AustraliaEspañol – SpainРусский – RussiaРусский – KazakhstanEspañol – Latin America Português – Brazil Україна – Ukraine

Atomic

ARGB MINI TOWER CASE

High-performance mini tower case with a mesh front panel design for increased air circulation and viewing of your front LED fan. Wide and sturdy chassis design supports two additional vertical expansion slots, allowing you to install your graphics card at a vertical position. Full tempered glass side panel with a convenient hinge mechanism and handle allows for easy opening and closing while showcasing the inside of your rig.

Two rubber cable grommets and two cable passthrough tubes on the motherboard tray allow for efficient cable management while keeping your cables neat and secure. Comes equipped with one 20cm ARGB fan in the front and one 12cm ARGB fan in the rear of the case that can be controlled via ARGB motherboard or LED control button.

  • Comes equipped with one 20cm ARGB fan in the front and one 12cm ARGB fan in the rear of the case
  • Two vertical expansion slots allow for vertical graphics card installation
  • GPU bracket keeps your graphics card secure and stable (Available only for Atomic-G-BK-v2) 
  • Two rubber cable grommets and two cable passthrough tubes allow for efficient cable management
  • Full tempered glass side panel with a convenient hinge mechanism and handle 
  • Supports liquid cooling in the front, top, and rear of the case

Specifications are subject to change without notice.
Products and models may vary depending on your region.
Contact your local retailer for more information. 

Where To Buy
FEATURES SPECS VIDEOS

SPACIOUS INTERIOR FOR MAXIMUM PERFORMANCE

Featuring a chassis design focused on delivering increased interior space, you now have more freedom and possibilities with your components. With more room for your graphics card, coolers and fans, and even your motherboard, the Atomic will allow you to fully maximize the performance of your PC build.

Built with two additional vertical expansion slots, this case allows you to install your graphics card at a vertical position.

GPU BRACKET FOR OPTIMAL GRAPHICS CARD INSTALLATION

Includes a GPU bracket that keeps your graphics card stable and secure while preventing it from sagging. Depending on the size of your graphics card, you can adjust the height and width of the GPU bracket accordingly. 

Available only for Atomic-G-BK-v2 

ADDRESSABLE RGB COMPATIBLE

Take full control of your Addressable RGB fans using one of two ways:

  1. RGB LED control button on top of the case
  2. Addressable RGB motherboard

TWO ADDRESSABLE RGB FANS INCLUDED

Comes equipped with one 20cm ARGB fan in the front and one 12cm ARGB fan in the rear of the case to add a stylish flair to your rig.

FULL TEMPERED GLASS SIDE PANEL WITH HINGE DESIGN

Full tempered glass side panel with a convenient hinge mechanism and handle allows for easy opening and closing while showcasing the inside of your rig.

EFFICIENT CABLE MANAGEMENT

Comes equipped with two rubber cable grommets and two cable passthrough tubes on the motherboard tray to keep your cables neat, tidy, and secure.

IMPROVED AIR VENTILATION

Mesh front panel design allows for increased air ventilation and viewing of your front LED fan.

AIR COOLING

Supports air cooling in the front, top, and rear of the case to enhance cooling performance.

    • Front: 120mm x 2 or 140mm x 2 or 200mm x 1 (200mm ARGB Fan x 1 included)
    • Top: 120mm x 2 or 140mm x 2 (Max.)
    • Rear: 120mm x 1 or 140mm x 1 (120mm ARGB Fan x 1 included)

LIQUID COOLING

Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.

  • Front: 120/240/280mm Radiator (Optional)
  • Top: 240mm Radiator (Optional)
  • Rear: 120mm Radiator (Optional)

BUILT FOR HIGH PERFORMANCE

  • Supports Micro-ATX and mini-ITX motherboards
  • Supports CPU cooler up to 184mm (104mm if mounting GPU vertically)
  • Supports high-end graphics cards up to 347mm (without front radiator)

CONVENIENT ACCESS TO YOUR MEDIA

Quick and easy access to LED control button, USB3.0 x 2, HD audio and mic ports, and power & reset button.

STORAGE CAPABILITY

Supports up to 2 x 3.5”HDDs (1 x 3.5” and 1 x 3.5”/2.5”) and 4 x 2.5” SSDs (3 x 2.5” and 1 x 2.5”/3.5”).

EASY MAINTENANCE

Comes equipped with removable top and bottom dust filters for convenient cleaning and maintenance.

PRODUCT GALLERY

SPECS

Model Atomic
Case Type Mini Tower
Color Black
Body Material SPCC
Front Panel Material ABS
Steel Thickness 0.5mm 
Motherboards Micro ATX/mini-ITX
Case Dimensions (Internal) 230 x 375 x 350mm (W x H x D)
Case Dimensions (Overall) 230 x 390 x 403.5mm (W x H x D)
3.5” Drive Bays 2 Max. (1 x 3.5” and 1 x 3.5”/2.5″)
2.5” Drive Bays 4 Max. (3 x 2.5” and 1 x 2.5”/3.5”)
Expansion Slots 4+2
GPU Clearance Supports GPU up to 347mm (without front radiator)
CPU Clearance Supports CPU coolers up to 184mm (104mm if mounting GPU vertically)
Air Cooling Front: 120mm x 2 or 140mm x 2 or 200mm x 1 (200mm ARGB Fan x 1 included)
Top: 120mm x 2 or 140mm x 2 (Max.)
Rear: 120mm x 1 or 140mm x 1 (120mm ARGB Fan x 1 included)
Liquid Cooling Front: 120/240/280mm Radiator (Optional)
Top: 240mm Radiator (Optional)
Rear: 120mm Radiator (Optional)
I/O Ports USB3.0 x 2 | HD Audio & Mic.
Internal Cable Management Depth 24mm
Power Supply ATX PSU (Including cables, up to 191mm) (Optional)
EAN Code Atomic-G-BK-v1: 4710562755893
Atomic-G-BK-v2: 4710562757545 (GPU bracket included)

Download your user manual here.

Download

VIDEOS