Pulse L240

High-performance liquid cooling solution with a stylish Halo LED design and 8 unique RGB lighting modes that can be adjusted using a convenient LED control switch. Built-in Addressable RGB compatibility allows you to connect directly to Addressable RGB motherboards and fans.
The Pulse is built to meet the highest engineering standards, ensuring your system will stay cool even under the most demanding conditions.

Comes with 8 LED lighting effects that can be controlled via LED control button
Compatible with Addressable RGB motherboards
Pure copper water block with micro channel design
Pump coupled together with radiator instead of the block
Balanced impeller and high-quality bearings allow for silent performance
Low-density fins per inch radiator (LFPI) provide more air flow
High-quality, teflon coated tubing allows for ultra-low water loss
Unique flower-shaped fan delivers unbeatable cooling performance

Specifications are subject to change without notice.
Products and models may vary depending on your region.
Contact your local retailer for more information.

FEATURES

Halo RGB LED Lighting

Featuring a stylish Halo LED design and 8 unique RGB lighting modes that can be adjusted using a convenient LED control button, this liquid cooler breathes life into your PC build while delivering high-performance liquid cooling.

Addressable RGB Compatible

Stylize and personalize your lighting experience with 16.8 million colors. This liquid cooler is fully compatible with Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock RGB Sync).

Halo RGB LED Lighting

Featuring a stylish Halo LED design and 8 unique RGB lighting modes that can be adjusted using a convenient LED control button, this liquid cooler breathes life into your PC build while delivering high-performance liquid cooling.

Addressable RGB Compatible

Stylize and personalize your lighting experience with 16.8 million colors. This liquid cooler is fully compatible with Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock RGB Sync).

Cables And Connectors

The Pulse comes with three connectors for maximum compatibility.
Set up your liquid cooler using any one of the following methods:

Addressable RGB Motherboard Connector
– For access to your Addressable RGB motherboard’s RGB functions

SATA Power Connector with Addressable +5V RGB Fan Connector
– For access to the Pulse’s built-in LED lighting effects and an additional Addressable RGB fan or other 3rd party Addressable RGB products

SATA Power Connector
– For access to the Pulse’s built-in LED lighting effects

Micro Channel Design Water Block

Water block is built with pure copper for a superior heat conductivity. The block’s micro channel design allows for faster heat dissipation, keeping your CPU at the ideal temperature under standard and overclocking performance scenarios.

    

Micro Channel Design Water Block

Water block is built with pure copper for a superior heat conductivity. The block’s micro channel design allows for faster heat dissipation, keeping your CPU at the ideal temperature under standard and overclocking performance scenarios.

MOTOR

The motor of this liquid cooler is built with a balanced impeller and high-quality bearings that allow for near-silent performance. Comes with a built-in, cosmetic fan that spins when the motor is turned on.

Pump Coupled With Radiator

The pump is placed together with the radiator instead of the water block to reduce vibrations to the CPU. This lessens stress on the CPU, helping to extend its lifetime.

Pump Coupled With Radiator

The pump is placed together with the radiator instead of the water block to reduce vibrations to the CPU. This lessens stress on the CPU, helping to extend its lifetime.

Low-Density Fins Per Inch Radiator

Low-density fins per inch radiator (LFPI) allows for air generated by the fans to pass through nearly unobstructed while providing just the right heat dissipation surface needed for the system. This achieves a perfect balance between cooling performance and noise reduction.

Low-Density Fins Per Inch Radiator

Low-density fins per inch radiator (LFPI) allows for air generated by the fans to pass through nearly unobstructed while providing just the right heat dissipation surface needed for the system. This achieves a perfect balance between cooling performance and noise reduction.

MOTOR

The motor of this liquid cooler is built with a balanced impeller and high-quality bearings that allow for near-silent performance. Comes with a built-in, cosmetic fan that spins when the motor is turned on.

Tubes

This liquid cooler is built with the highest quality tubing and fittings made of soft and durable material. Teflon coating on the tubing allows for ultra-low water loss, helping to extend the product lifetime.

Tubes

This liquid cooler is built with the highest quality tubing and fittings made of soft and durable material. Teflon coating on the tubing allows for ultra-low water loss, helping to extend the product lifetime.

Flower-Shaped Fan Design

Unique Flower-Shaped fan design increases air pressure and reduces air resistance for superior cooling performance.

High-Efficiency Cooling

High-performance silent fan designed to maximize cooling efficiency while minimizing noise.

Flower-Shaped Fan Design

Unique Flower-Shaped fan design increases air pressure and reduces air resistance for superior cooling performance.

High-Efficiency Cooling

High-performance silent fan designed to maximize cooling efficiency while minimizing noise.

Anti-Vibration Pads

Anti-Vibration pads absorb and dampen vibrations caused by fan rotation.

Anti-Vibration Pads

Anti-Vibration pads absorb and dampen vibrations caused by fan rotation.

Gallery

SPECS

Model Pulse L240
Block Material Copper
Radiator Material Aluminum
Radiator + Pump Dimensions 296mm(L) x 123.5mm(W) x 40.5mm(T)
Pump
Speed 2800 rpm
Rated Voltage 12 V
Power Consumption 8.4 Watts
Noise < 25dBA
Bearing Type Ceramics Bearing
MTBF (Mean Time Before Failure) 80000 hrs.
TDP (Thermal Design Power) 400W
FAN
Speed 600-1800 rpm
Connector PWM 4-Pin
Dimensions 120mm x 120mm x 25mm
Bearing Type Hydraulic Bearing
Starting Voltage 9 V
Rated Voltage 12 V
Rated Current 0.16 A (One Fan)
Power Consumption 1.92 Watts (One Fan)
Air Pressure 0.59 – 1.34 mm-H2O
Air Flow 29.84-71.65 CFM
Noise Level 10.5 – 31.8 dBA
MTBF (Mean Time Before Failure) 60000 hrs.
Socket LGA 2066/2011-V3/115X/775/1200
FM1/FM2/AM4/AM3+/AM3/AM2+/AM2

DOWNLOAD

Download your user manual here.